Volkswagen Flush Wiper Delete Kit

- High quality OEM+ look.
- Stronger than glass.
- No AliExpress!
- UV protection, do not discolour.
- Virtually scratch resistant with normal use.
- Also fit in all GTI,GTD,GTE,R models.
- Available directly from stock, delivered within a few working days. 

What is included in the kit?

- 1x Wiper Delete
- 1x 15ml Black Kit
 
Install time:
15 to 20 minutes

What do you need for assembly?
- The wiper delete + black kit and tie wraps (included in the kit!)
- A socket set + screwdriver

Mounting instructions
- Important: Foil of the wiper delete only remove after assembly!
- Dismounting the wiper arm
- Remove the interior lining
- Next you have the wiper motor visible.
- Loosen 3 nuts
- Disconnect the wiper motor plug
- If necessary, remove the hose from the wiper motor and tie/bolt it in.
- Then remove the rubber seal from the window
- Clean the windscreen and check if the wiper delete fits well. Always be extra careful with the window.
- Mount the wiper delete from the inside of the car using the kit provided. Text on the wiper delete comes on the inside. (Inside is written on it)
- Lightly twist the cap back and forth to get rid of any air bubbles.
- Then allow to dry and reassemble the trim.
- Drying time is about 6 hours, after 24 hours you can wash the car again.
- Finally, remove the protective film that is on the wiper delete.